Always moving forward with Integrity

 

 

Integrity Plugz Inspection Ports & Accessories

 

Integrity Plugz™ High Temperature Silicone

Integrity Plugz™ are patented inspection ports designed to provide large, re-sealable, safe, and continuous entry to insulated pipes, tanks, vessels, and equipment. Integrity Plugz™ patented design features allow you to monitor systems efficiently, i.e., Non-Destructive Testing (NDT) and other integrity monitoring procedures, and add strength to your Asset Integrity program.

 

Integrity Plugz™ EPDM Rubber

Integrity Plugs EPDM are made from a durable rubber compound and provides affordable protection against mid temperature applications, weather, ozone exposure, and mechanical damage.

 

Integrity Pillowz

Integrity Pillowz provide extra protection in applications involving high temperatures by acting as a barrier between an internal pipe and Integrity Plugz™ inspection ports (replaces cut out insulation). Made from high heat resistant technical fabrics, Integrity Pillowz can provide temperature resistance up to 815.6C (1500 F)

 

TML Inspection Point Labels

In a corrosion and erosion monitoring, proper location and identification of thickness measurement points is essential to your asset integrity program. High quality thickness measurement location (TML) Labels are an affordable and simple solution for marking and identifying your locations.

 

Corrosion Under Insulation Products

 

Integrity Termination Gasket

Integrity Termination Gaskets protect insulated systems from corrosion by ensuring watertight terminations. Termination Gaskets are made from a high-quality silicone compound and are a quick and easy solution offering insulation friendly termination and compartmentalization of insulation systems.

 

Integrity Water Indicator (WUI)

Water Indicator WUI uses a unique patented solution with a water sensitive ball of expanding elastomer to indicate the presence of water under insulation. This efficient system allows for easy detection within 24 to 48 hours of water exposure, pointing out critical areas for inspection. The system can easily be reset for reuse. Made with tough, electrically conductive, all-weather Polyamid, the Water Indicator WUI can be used in all climatic conditions. The composition of the Polyamid makes it applicable to high-temperature equipment with an operational temperature of up to 150°C (302°F) in contact areas.

 

Integrity Drain Plugs

Integrity Drain Plugs are easily installed and adjusted to insulation thickness and prevent loss on insulating value by draining moisture from the insulation system, allowing for more airflow (dry the insulation) and mitigate CUI (Corrosion Under Insulation) risks.

 

Integrity Insulation Spacer PPS


The Integrity Products Insulation Spacer allows you to establish a non-contact insulation system by creating a unified and consistent air gap between the insulation and the process pipe. This system helps mitigate Corrosion Under Insulation (CUI) risk by creating an air gap between the insulation system (a common source of water infiltration) and the process pipe. This air gap prevents any moisture ingress from coming in contact with the pipe. Made from a flame-resistant, non-combustible polyphenylene sulfide (PPS), the Insulation Spacer works with most types of insulation and in various applications. 

 

Integrity Insulation Spacer - Silicone


The Integrity Products Insulation Spacer (silicone) allows you to establish a non-contact insulation system by creating a unified and consistent air gap between the insulation and the process pipe. This system helps mitigate Corrosion Under Insulation (CUI) risk by creating an air gap between the insulation system (a common source of water infiltration) and the process pipe. This air gap prevents any moisture ingress from coming in contact with the pipe.  Made from high performing silicone rubber,  the insulation spacer is held in place with our spacer band to ensure strategic placement locations on the process pipe and works with most types of insulation and in various applications.

 

Integrity Clamp Covers™


Integrity Products’ Integrity Clamp Covers™ are designed to make it quick and easy to seal protrusions around pipe clamps on insulated piping systems. These clamp covers are made from a high-performing EPDM rubber for extra protection against temperature, mechanical damage, weathering, and UV and ozone exposure. The task of trying to install cladding around pipe clamps on insulated piping systems has traditionally been very difficult — requiring an excessive amount of time from even a skilled tradesperson to complete! Now with Integrity Clamp Covers™, you can achieve a neat and tidy finish with a water-tight seal in a fraction of the time.

 

Integrity PTFE Spacer Wrap


 
Integrity Products Spacer Wrap allows you to establish a non-contact insulation system by creating a unified and consistent air gap between the insulation and the process pipe. This system separates the insulation system (a common source of water infiltration) and the process pipe. The air gap prevents any moisture ingress from coming into direct contact with the pipe. Made from a high performing polytetrafluoroethylene, the Spacer Wrap works with all types of insulation and in various applications.

Other Products

Connex Rare Earth Magnets

Made from a rare and powerful earth metal called neodymium, Connex Magnets are reinforced with a steel base plate and encased in high-performance EPDM rubber. Connex magnets are sold as a set and create a robust connection system.

G-Units Atmospheric Testing Ports

G-Units are large, re-sealable atmosphere inspection ports that allow you to monitor the air quality of any building or confined space before entry. G-Units are quick and easy to install and provide safe access for repeated atmospheric testing.

Nace International Corrosion Conference 2020

MARCH 16th - 19th

This comprehensive conference is jam-packed with technical information exchanges and sessions. Attendees can plan their day around a wide variety of conference offerings such as a symposia presentation on the latest corrosion prevention techniques, a forum discussion about best practices for corrosion mitigation, or a committee meeting to hear about current and upcoming NACE standards.

After a full day of technical presentations or checking out the latest problem-solving products and services displayed in the Exhibit Hall, attendees can find networking opportunities and receptions where you can connect with the entire global community. Meanwhile, exhibitors can expect their days to be filled with speaking to CORROSION’s extensive audience of decision-makers and key players from across the corrosion industry that only CORROSION can attract.

Please click the link below and fill out this form to receive your free passes and we look forward to seeing you in Houston, TX

NACE Trade Show Pass 2020